HT Drive Overview
- Genuine valve design
- Operates at 300V HT
- Cascaded valve gain stages
- Responds like a valve amp
- Unique 'Class A' tone control
- Fully equipped for stage or studio
- Speaker emulated output
- High integrity buffered bypass
- Power supply included
- Silent switching
General Product Range HT Pedals Model HT Drive Technology Type Valve Valves Preamp Valves ECC83 / 12AX7 Poweramp Valves Electronics Wattage Inputs Controls Gain, Tone, Level, Output, Speaker Emulated Output, Input Channels - Dimensions Weight 1.2KG Dimensions (Width x Height x Depth) 160 x 119 x 80 (mm)
Unique 'Class A' Tone Control
Our 'Class A' tone control was inspired by our research into the high frequency power amplifier response of Class A amps. Its unique design always retains your guitars natural character and ensures your 'backed off' tone is never dull and lifeless.
Speaker Emulated Output
The Blackstar emulated output design is a new benchmark for pro direct recording. This no-compromise design makes it easy to get your tone to disk and tape. You can also use it to run a line out to a PA.
Operates at 300V HT
The HT pedal operates on a 300V DC anode supply voltage (High Tension voltage). This is the same used in traditional valve amplifier design and means the circuit has the headroom associated with a true valve design and will 'clean up' accordingly. The pedal will exhibit the compression and distortion characteristics associated with a true valve design.
Many hours of research showed us that only soft switching and a buffered bypass signal will give absolutely silent switching in high gain applications.
The ISF control works in conjunction with the Tone control. It allows you to choose the exact tone signature you prefer. Fully CCW is a more American characteristic with a tight bottom end and more aggressive middle, and fully CW is a British characteristic which is more ‘woody’ and less aggressive.