HT Delay Overview
- 8 delay effects
- Genuine valve design
- Operates at 300V HT
- Unique saturation control
- Tap and two loops modes
- Unique switching operation
- Silent switching
- Power supply included
- High integrity buffered bypass
General Product Range HT Effects Pedals Model HT Delay Technology Type Valve Valves Preamp Valves ECC83 / 12AX7 Poweramp Valves Electronics Wattage Inputs Controls Effect, Time, Feedback, Saturation, Level, Input, Left (Mono) Output, Right Output Channels - Dimensions Weight 1.3KG Dimensions (Width x Height x Depth) 160 x 119 x 80 (mm)
Eight Delay Effects
With eight different delays in one pedal, the HT-DELAY can take you from vintage and multihead tape delays, through to classic analogue and linear full bandwidth effect. Each of the effects can be altered further using the Saturation control.
Operates at 300V HT
The HT pedal operates on a 300V DC anode supply voltage (High Tension voltage). This is the same used in traditional valve amplifier design and means the circuit has the headroom associated with a true valve design and will 'clean up' accordingly. The pedal will exhibit the compression and distortion characteristics associated with a true valve design.
Many hours of research showed us that only soft switching and a buffered bypass signal will give absolutely silent switching in high gain applications.
Unique Saturation Control
By adjusting the drive to the high voltage valve circuit in the effect side chain, Saturation affects the amount of valve compression and harmonics in the effect. As you turn the control clockwise the amount of saturation goes from clean right through to a mild crunchy valve sound.
Tap and Two Loop Modes
The HT-DELAY pedal features tap/loop modes. Loop 1 features a One shot / Loop plackback, trigger function which can record what you are playing and either play it back once or loop the whole phrase. Loop 2 features an Overdub which can be selected to loop your recorded sound.