Artisan 15 Overview
- Class A 15W Combo
- Switch for 5W triode mode / 15W pentode mode
- 2 x EL84 output valves
- EF86 channel
- ECC83 channel
- Hi and Lo inputs perfect for channel blending
- Impedance selector
- Celestion G12M Greenback (Also available with a Celestion Vintage 30)
General Product Range Artisan Series Model Artisan 15 Technology Type Valve Valves Preamp Valves ECC83, EF86 Poweramp Valves 2 x EL84 Electronics Wattage 15 Inputs Hi Input, Low Input for each channel Controls Volume and Tone for each channel Channels 2 - Channel 1 – The ECC83, Channel 2 – The EF86 Channel Speakers Speaker Size 12" Speaker Model Celestion G12M Greenback (Also available with a Celestion Vintage 30) Speaker Amount 1 Dimensions Weight 23KG Dimensions (Width x Height x Depth) 617.5 x 544.5 x 234.5 (mm)
Each Artisan amplifier is designed to offer the widest range of classic vintage and boutique tones to the highest possible sonic standard. This is achieved by the design of electronics circuits that work in harmony with the finest components and materials available. All the designs are simple in their operation and yet deceptively flexible in their functionality.
Celestion 12M Greenback Speaker
The Greenback has a loud and assertive character that sounds great through a valve amp pushed into overdrive. The speaker has evolved over the decades and still presents that instantly familiar woody tone, delivered with a knockout punch.
Switch 5W triode mode / 15W pentode mode
In triode mode the tone is round and bluesy with a mellow top end for laid back soloing. The triode mode also has the benefit of producing more saturated distortion tones at lower output levels which makes this mode ideal for recording and practice. The pentode mode produces a more dynamic feel and is louder and more punchy than the triode mode. This setting is recommended for dynamic clean sounds and more pushy sounding crunch tones. This is a great setting for rehearsals and small club gigs.
The Artisan's topology allows the blending of the two channels. By paralleling the guitar connection to the inputs of Channel 1 and Channel 2 endless tonal variations can be explored. Use the hi input if you wish to achieve power amplifier break-up and overdrive. Use the lo input if you wish the amplifier to remain clean (this is especially useful if the guitar used has high output pick-ups).
The control matches the amplifier's impedance to that of the connected speakers. Always ensure that the selected impedance matches that of the internal and/or external speaker cabinets. (if combo). The Artisan's (combo only) internal speaker is 16 Ohms, so when used by itself the Impedance Selector must be set to 16 Ohms. If an additional 16 Ohm speaker cabinet is used together with the internal speaker the Impedance Selector should be set to 8 Ohms. A speaker cabinet of less than 16 Ohms should not be used together with the internal speaker. (show diagram of the speakers possible)
Welded Steel Chassis
The Artisan range represents quality. This is reflected in the fact that the amplifier uses a welded steel chassis for strength and durability as well as overall quality.