The Artisan Thread

HAND-CRAFTED TONE. Artisan Series Amplifiers.
Posts: 14
Joined: Thu May 20, 2010 12:00 am
Location: Southampton, England.

Fri May 21, 2010 5:55 pm

Great Myspace clip btw, looking on your page - an Idlewild fan?! They're my favourite band! :D

Posts: 11
Joined: Tue Apr 20, 2010 12:00 am
Location: West Yorkshire

Sat May 22, 2010 11:59 am

yeah im a big idlewild fan haha. i got the 30 so i could crank it to get the tone. and the 2x12 just cos its smaller than the 4x12. it takes 120w rms if i recall which is plenty. just had mine revalved and sounds even better with my blackstar dual

Posts: 23
Joined: Tue May 11, 2010 12:00 am
Location: Hampshire, UK

Fri Jan 07, 2011 6:46 pm



Posts: 1
Joined: Tue Feb 01, 2011 1:00 am

Tue Feb 01, 2011 3:07 pm


I use an Artisan 30H too and I got some questions.
If the channels are blended, is it possible to pull the instrument cable out while the patch cable still is in there or does it harm the amp?
Can I change the output between 10 and 30 watts if the amplifier is in standby or do I have to turn it off first?


Posts: 35
Joined: Thu Jul 07, 2011 12:00 am
Location: New York City

Mon Dec 12, 2011 7:45 pm

Artisan 100 into a Mesa Cab with V30's and an old cab with Greenbacks. This thing KILLS. :twisted:


Posts: 1
Joined: Fri Feb 24, 2012 1:00 am

Sat Feb 25, 2012 12:04 am


I have an Artisan 15 and would appreciate some help.

Both the power and standby switches seem very strong and snap in to place, however the wattage switch is flimsy in comparison and feels like it might break when I use it.

Is this normal? I bought it second hand and think it may have taken a knock.



Posts: 1
Joined: Thu Feb 28, 2013 4:47 pm

Thu Feb 28, 2013 4:59 pm

Hi Ben,

Just purchased the Artisan 15 Combo (brand new) myself and yes the switches on mine are as you described.



Posts: 3
Joined: Sun Oct 21, 2018 6:49 pm

Thu Dec 27, 2018 9:06 pm

thought I would experiment with a few different tube combinations to see if I could juice the gain up a bit.

Mr Co
Posts: 10
Joined: Wed Oct 10, 2018 6:02 pm

Sun Jan 20, 2019 8:12 pm

Has anyone maybe done an MASTER VOLUME mod to this amp?
I have it at home but even at 5W its too loud for home usage

Posts: 2
Joined: Fri Dec 27, 2019 8:18 am

Thu Jan 09, 2020 6:22 am

middi wrote:
Tue Apr 20, 2010 12:20 pm
show us your artisan's then people. heres mine

meilleur taux
artisan 30h and 212 cab.

i also run the HT dual for my dirty needs
hi, i would like to know more about the launch of HT dual

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 2 guests