My S1-200's

Upload your pictures here
Post Reply
mtt78
Posts: 6
Joined: Tue Aug 23, 2011 12:00 am
Contact:

Mon Dec 19, 2011 12:35 am

Two Blackstar S1-200, straight into 2 THD @ 4 ohm that act as load allowing me to drive the signal to the G-Force and then into the 395 power amp.

Image

Crunchifyable
Posts: 206
Joined: Thu Sep 15, 2011 12:00 am

Tue Dec 20, 2011 8:01 am

That's a powerful setup! Kind of Curious though as to why you chose 200 watt amps with attenuators rather than say 50 or 100 watt ones with the built in DPR. Unless you find DPR is worse for the sound than attenuators.

mtt78
Posts: 6
Joined: Tue Aug 23, 2011 12:00 am
Contact:

Tue Dec 20, 2011 5:28 pm

Hi, i need a 200W head becouse we play in very low tuning, and the more low you go the more power you need to not sound to much messy.

I choose to run with the THD so i can disconnect the speaker from the head and use the line out of the THD to go straight to the G-Force and then into the mesa power amp
in this way i run the heads as simple pre-amps but i get the sound from their power amps section so it's bolder and bigger !

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 10 guests