Page 1 of 1

My S1-200's

Posted: Mon Dec 19, 2011 12:35 am
by mtt78
Two Blackstar S1-200, straight into 2 THD @ 4 ohm that act as load allowing me to drive the signal to the G-Force and then into the 395 power amp.

Image

Re: My S1-200's

Posted: Tue Dec 20, 2011 8:01 am
by Crunchifyable
That's a powerful setup! Kind of Curious though as to why you chose 200 watt amps with attenuators rather than say 50 or 100 watt ones with the built in DPR. Unless you find DPR is worse for the sound than attenuators.

Re: My S1-200's

Posted: Tue Dec 20, 2011 5:28 pm
by mtt78
Hi, i need a 200W head becouse we play in very low tuning, and the more low you go the more power you need to not sound to much messy.

I choose to run with the THD so i can disconnect the speaker from the head and use the line out of the THD to go straight to the G-Force and then into the mesa power amp
in this way i run the heads as simple pre-amps but i get the sound from their power amps section so it's bolder and bigger !