Search found 502 matches

by IM4Tone
Sat Sep 29, 2012 3:21 pm
Forum: Series One
Topic: S1 45 serious issue
Replies: 5
Views: 7861

Re: S1 45 serious issue

Thanks guys! I was actually hoping that it's just the preamp tubes, the easiest and relatively cheap fix to the problem. But a cold solder joint as suggested by IM4Tone seems like more possible in this situation - gentle tapping on top of amp stops the noise for a short while, so it looks like some...
by IM4Tone
Fri Sep 28, 2012 5:32 pm
Forum: Blackstar Amps
Topic: Whats going on with product availability?
Replies: 7
Views: 5873

Re: Whats going on with product availability?

I know this doesn't help you a lot, but they're available for shipment in several large internet music supply stores in the US. So, who knows why not in Europe?
by IM4Tone
Fri Sep 28, 2012 5:22 pm
Forum: Series One
Topic: S1 45 serious issue
Replies: 5
Views: 7861

Re: S1 45 serious issue

Sonofarich wrote:Popping/crackling is usually a symptom of tubes. If you can't get it to the tech and have access to preamp tubes, I would replace them and see if that solves your issue.
^^ yes, OR a cold solder joint.
by IM4Tone
Wed Sep 26, 2012 12:11 am
Forum: HT-5
Topic: Multi Effects Board
Replies: 17
Views: 17751

Re: Multi Effects Board

majikmojo wrote:sorry - im no help
pretty much hate multi pedals...lol
Image Wouldn't argue too strongly with that. ;)
by IM4Tone
Tue Sep 25, 2012 6:39 pm
Forum: HT-5
Topic: Multi Effects Board
Replies: 17
Views: 17751

Re: Multi Effects Board

Modeling and multi-effects pedals always leave me "wanting". Wouldn't say that they're bad, but IMO they are lacking in comparison to individual pedals. I'd much rather have 2 or three pedals of my choice (TS or various Boss) versus a multi that tries to do everything. I still have a DigiTech RP355 ...
by IM4Tone
Mon Sep 24, 2012 6:19 pm
Forum: HT Venue Series
Topic: Just re-tubed my HT-60 and...
Replies: 8
Views: 6381

Re: Just re-tubed my HT-60 and...

RHendrix wrote:As far as I can tell, yes. Internal and external speaker are plugged into the two marked 1 4 Ohm or 2 8 Ohm. I'm a little fuzzy on that, since the HTV 2x12 is 8 Ohms
That's correct.
by IM4Tone
Mon Sep 24, 2012 4:53 pm
Forum: HT Venue Series
Topic: Just re-tubed my HT-60 and...
Replies: 8
Views: 6381

Re: Just re-tubed my HT-60 and...

i have no such issues using the xtra cabinet - doesnt cut or add volume at all and sounds much better than the combo by itself and does not affect gain at all - what your describing does not sound normal ?? Yeah, I know. I've never experienced it before either, but then this was my first adventure ...
by IM4Tone
Sat Sep 15, 2012 1:56 pm
Forum: Blackstar Amps
Topic: Views please on Celestion G12t 75
Replies: 6
Views: 6889

Re: Views please on Celestion G12t 75

majikmojo wrote:.........i've always thought the 30's sound best when paired with something else...
^^^agreed. I like the G12H paired w/ the V30, and that's what I use. But in all fairness, I've never owned a G12T 75, so can't advise if it's better.
by IM4Tone
Tue Sep 04, 2012 11:37 pm
Forum: HT Venue Series
Topic: HT20 Combo with the HTV212?
Replies: 14
Views: 10637

Re: HT20 Combo with the HTV212?

And here's another thought: You could buy the HTV212, replace the two speakers in it with 2 ea. 8 ohms wired in series (yields 16 ohms) and then sell the two speakers you removed. Maybe a local music store would do the changeout for you if they handled both B* cabs and replacement speakers, giving y...
by IM4Tone
Tue Sep 04, 2012 6:29 am
Forum: HT Venue Series
Topic: HT20 Combo with the HTV212?
Replies: 14
Views: 10637

Re: HT20 Combo with the HTV212?

bruunm wrote:Thanks IM4TONE!!!

I actually did look at the Avatars. I have also emailed them to see how much a shipment is to Australia...

Cheers!
/M.
Oh Wow, didnt know you were so far away. The shipping will probably be quite costly. No source for cabs within Austrailia?